|
SmallCorp aluminum support panels provide a flat, rigid and archival mounting surface. They are custom made to your dimensions and may be used alone or in a frame. The aluminum panel is not
intended to be a display surface.
The panel has a 1/2" aluminum honeycomb core with .016" aluminum skin and a sealed poplar perimeter. Panels over 48" x 96" have pieced aluminum skins joined with an aluminum to aluminum bond to provide a continuous flat surface.
The perimeter may be one of three styles depending on the use. SP-1 has front and back skins flush to the edges. SP-2 and SP-3 have exposed wood on the back to facilitate wrapping or to provide a thicker edge.
When a thinner panel is needed, the SP-8 is an option. It has a 1/4" honeycomb core with exposed wood on the back but is not recommended over 24" x 30".
The SP-1, SP-2 and SP-3 can be laminated with a 30 pt. paper surface (softwhite conservation board up to 90" wide) or unbleached muslin.
|